80w LED Street Light
|Power:||100w / 150w / 200 watt|
|Input Voltage:||AC 200 – 240 V|
DC driver without strobe
The shell can dissipate the heat directly.
LED Light Source: high light efficiency, low light depreciation, light source module
Shell: The lamp shell can dissipate the heat directly, which improve the heat-sinking function and increase the lamp power. The lamp fixture, without heat-sinking tooth at the back, has good self-cleaning properties, not easy for dirt retention.
Effect: Use PC lens, soft light and uniform illumination.
Firmness: The lamp fixture itself use PC lens, not traditional glass, and aluminum, which is firm enough and convenient for transportation.
IP Rating: IP65.
Application of 80w LED Street Light: city road, sidewalks, square, school, park, yard, residential areas, factory and other outdoor lighting areas.
This 80w led street light is composed of the bottom case of electrical box, front cover, small cover, heat-sink, light source module, lens, power, and upper cover of the electrical box. The structural chart is as follows:
|1||Bottom Cover of Electrical Box||5||Light Source module|
|3||Small cover||7||Power Supply|
|4||Heat Sink||8||Upper Cover of Electrical Box|
|Working Temperature(℃)||– 30 ～40|
|Working Humidity(RH)||0 ～90 %|
|Materials||die-casting aluminum + aluminium profile + lens|
When you install the light, the first step is to fix the lamp on the street lamp pole through the lamp installation bracket. Connect the null wire, the earth wire, the live wire of the cable wire with the power system according to the requirements (there is connection mark). After checking, connect the electricity, then the street lamp can work normally. The specific installation steps are as follows:
- Open the back cover, fix the lamp through pressing plate of the pole, and fix the lamp in the pole.
- Connect the wires according to the connecting mark:
Connecting Mark： N L
N：Null Wire, ：Ground Wire, L：Fire Wire
- Close the back cover, fix it with the clip. Please note not to press the cable.
- The package for street light is carton. People should avoid serious impacting, insolating and drenching when transporting. The package cannot be serious bumped, turned over, threw, rolled or pressed.
- Reserve the street light in the place which is cool, dry and clean.